C.Itoh EZ-1305 Bedienungsanleitung PDF herunterladen (Seite 11)

2. Printer Installation

This printer model has the following print modes:

Thermal

Transfer (TT)

When printing, ribbon must be installed to transfer the print contents onto the

media.

Direct Thermal

(DT)

When printing, no ribbon is necessary; it only requires direct thermal media.

Please check which print mode you will use and then go into the Setting Mode to change the

print mode setting if necessary.

2-1. Ribbon Installation

1. Place the printer on a horizontal

surface and open the top cover by

pressing the Cover Open Buttons

on both sides.

2. Install the rewind ribbon roll from

the right side of printer and then

fix it on left side.

3. Press the locking tenons and then

lift up the Printing Mechanism.

4. Place a new ribbon roll from the

right side of printer and then fix it

on left side.

Note

Please align the Ribbon Supply Wheel

with the fillister of ribbon roll core when

installing the ribbon roll. You can rotate

the black gear as figure showed to help

to align the ribbon roll core.

EZ-1105 / EZ-1305 User’s Manual

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Keine Kommentare

C.Itoh EZ-1305 Bedienungsanleitung Seite 11